Brady low temperature radiator is the wisdom crystallization of our company's continuous pursuit of scientific and technological innovation in improving consumers' home life quality over the past ten years. Through a special process, the inner tube of the radiator is combined with graphene with the highest thermal conductivity to produce a new material graphene red copper inner tube with good heat transfer performance, which is compounded with inorganic nano corrosion-resistant hydrophilic materials. The radiator shell is made of 6063 aviation aluminum, which is commonly used in the manufacture of aerospace materials. It has high hardness, good heat dissipation, light and durable materials, so that the product can not only be durable, but also enable the whole shell to participate in heat dissipation and improve heat transfer efficiency. In winter, the water supply temperature only needs 50 ℃ warm water to achieve the same effect as that of traditional radiators through 90 ℃ hot water. It not only saves energy and emission, but also has no problems of scalding of traditional radiators and excessive local temperature in the room. This product adopts brand-new patented technology, adheres to innovation, and constantly introduces new high-quality radiators to the market to meet the safety, improvement and Artistic home life needs, open up a new era of heating products!

Product home decoration effect

Product advantages

Smooth surface

The electrostatic spraying operation controlled by the computer makes the appearance of the radiator smoother, has more excellent ability of "dustproof, moisture resistance, acid resistance and scratch resistance", and the appearance of the radiator is not easy to be corroded.

Strict production process

Brady radiator production line strictly abides by ISO9001 / 2000 production quality management process, fully automatic and without manual intervention, so as to reduce the defects caused by factors as much as possible.

Widened aluminum wing for large heat dissipation

Multi angle omni-directional heat dissipation, so that you are not afraid of the cold

Efficient convective radiation heat transfer

The inner tube of the radiator is composed of new graphene materials and composite polymer nano hydrophilic materials, so that the convection heat transfer between hot water and tube wall is very fast. The water supply temperature only needs 50 ℃ to meet the indoor temperature of 20 ℃. The inner pipe adopts large pipe diameter, large water flow, good circulation, large heat dissipation wing and enhanced heat transfer coefficient K.

Safe and durable

Brady radiator has 10bar maximum working pressure and 13bar test pressure, which is more safe and durable. The shell uses aviation special aluminum, which has superior stability and excellent corrosion resistance.

Integral die casting

The whole die-casting process is adopted, and the aviation aluminum embedded graphene red copper pipe is die-casting integrated. "Cathodic electrophoretic primer coating process" is adopted to ensure better resistance on the surface of the radiator.